EPO-TEK® 353ND is a two component, high temperature epoxy designed for semiconductor, hybrid, fiber optic, and medical applications.     

EPO-TEK ® 353ND can continuously perfom at 200°C and also tolarate + 300°C - 400°C for several hours. It is resistant to many solvents and chemicals and is ideal for bonding fiber optics, glass, ceramics and most plastics.

Please note due to the shelf life of this product it is made to order and is subject to a 10 day lead time.

EPO-TEK® 353ND is a two component, high temperature epoxy designed for semiconductor, hybrid, fiber optic, and medical applications.     

EPO-TEK ® 353ND can continuously perfom at 200°C and also tolarate + 300°C - 400°C for several hours. It is resistant to many solvents and chemicals and is ideal for bonding fiber optics, glass, ceramics and most plastics.

Please note due to the shelf life of this product it is made to order and is subject to a 10 day lead time.

AngstromBond EPO-TEK ® 353ND is a two component,100% solids, heat curing epoxy designed for high temperature applications.

EPO-TEK ® 353ND can continuously perfom at 200°C and also tolarate + 300°C - 400°C for several hours. It is resistant to many solvents and chemicals and is ideal for bonding fiber optics, glass, ceramics and most plastics.

AngstromBond EPO-TEK ® 353ND is a two component,100% solids, heat curing epoxy designed for high temperature applications.

EPO-TEK ® 353ND can continuously perfom at 200°C and also tolarate + 300°C - 400°C for several hours. It is resistant to many solvents and chemicals and is ideal for bonding fiber optics, glass, ceramics and most plastics.

This disposable syringe is used for dispensing expoxy into connectors, the syringe is supplied with a needle to allow a controlled amount of epoxy to be inserted into a connector.

The syringe can be supplied with three different needles, please contact us for more details.

This connector curing oven allows proper curing of several types of epoxy.

The oven can accommodate a varity of connector types including ST, FC, SC, D4 & SMA. The oven can terminate with controlled epoxy curing up to 24 fiber optic cables and connectors at any one time.

The adjustable thermostat controls the curing temperature over a range of 65°C to 125°C permitting the epoxy to cure at a lower temperature for longer periods of time (e.g., 100°C for 15 minutes).

Specifications

Temperature Range - From 60°C to 150°C.

Temperature Uniformity - ± 3.0°C over the temperature range.

Electrical Requirements

Model : 9551  -   120 VAC, 140 Watts.             

Model : 9551 EU - 240 VAC, 140 Watts.

Dimensions -  Height  3.2"   Width 5.25"  Depth 7.0"

Weight - 8.8 KG.